|
Standard sheath material
|
Ni-Cr steel, for temperatures up to 1500° (815°)
|
|
Standard thermocouple
|
.ANSI Type J
|
|
Optional thermocouple
|
ANSI Type K
|
|
Minimum bending radius
|
Three times the sheath diameter
|
|
Standard square cable
|
0.125" square
|
|
Standard rectangle cable
|
0.080" x 0.140", 0.105" x 0.150"
|
|
Standard round cable diameters
|
0.093", 0.125", 0.150", 0.188", 0.200", 0.250", 0.312", 0.375" - Other dimensions available
|
|
Cable diameter tolerance
|
±0.005
|
|
Standard potting adapter
|
0.281" / 0.250" diameter - used with heater only and heater with thermocouple leads, 20 gauge and finer - 1/2" - used with heater only and heater with thermocouple leads, 18 gauge to 12 gauge
|
|
Standard potting adapter length
|
1.0" - Other lengths available
|
|
Standard coil I.D
|
From 3/8" up to 2 1/2" in any increments
|
|
Coil I.D. tolerances
|
3/8” to3/4”, + 0.000”, - 0.020” - 7/8” to 1 1/4”, + 0.000”, - 0.030" - 1 1/2” to 2 1/2”, + 0.000”, - 0.060”
|
|
Coil length
|
Up to 12” on 3/8” to 3/4” I.D. - Up to 16” on 7/8” to 1 1/4” I.D. - Up to 18” on 1 1/2” to 2 1/2” I.D.
|
|
Coil length tolerance
|
0 to 6”: + 0, - 1/8” - 6 to 12”: + 1/8”, - 1/4” - 12 to 18”: ± 1/4"
|
|
Resistance tolerance
|
± 10%
|
|
Wattage tolerance
|
± 10%
|
|
Maximum amperage
|
Size dependent, consult factory
|
|
Standard Voltage
|
120 or 240 volts, for higher or lower wattages contact Durex Industries
|
+86-17059456950
Aluminum Foil Heater
Chinese
Deutsch
Espanol
Francais
Italiano
Portugues
Japanese
Korean
Arabic
Russian
