Ceramic Pellet Igniter Cartridge Heater
Product Description
CARTRIDGE HEATER - TECHNICAL DATA |
Outer Sheath Material |
Stainless Steel 304, 321, 316; Incoloy 800; Incoloy 840 |
Resistance Heating Wire |
NiCr 80/20 wire |
Wattage Tolerance |
+5%, -10% |
Resistance Tolerance |
+10%, -5% |
Voltage Available |
12 to 440 volts customied |
Maxium Heating Temperature |
800 Degree Celsius |
Length Tolerance |
±1mm |
Diameter Tolerance |
±0.02mm |
Standard Cold Size |
5-10mm |
Insulation Resistance (cold) |
≥ 500 MΩ |
Maxium Leakage Current (cold) |
≤0.5 mA |
Lead Orientation |
A) Crimped on Leads : PTFE/Fiberglass Flexible lead crimped on solid pin emerging from the Heater.
B) Swaged in Leads : Flexible Fiber Glass or PTFE leads emerging from within the heater.
|
Application
- Injection moulding-Internal heating of nozzies
- Hot runner systems-Heating of manifolds
- Packaging industry-Heating of cutting bars
- Packaging industry-Heating of hot stamps
- Laboratories-Heating of analytical equipment
- Medical:Dialysis,sterilization,Blood Analyzer,Nebulizer,Blood/Fluid Warmer,Temperature Therapy
- Telecommunications:Deicing,Enclosure Heater
- Transportation:Oil/Block Heater,Aiecraft Coffee Pot Heaters,
- Food Service:Steamers,Dish Washers,
- Industrial:Packaging Equipment,Hole Punches,Hot Stamp.
Ceramic Pellet Igniter Cartridge Heater
|